"TOP-FIX" Shower Tray Waste with Elbow Brushed Brass
Mark Vitow is the offical UK distributor of the revolutionary Top-Fix...the future of waste installation!
Top-Fix is a revolutionary solution which allows wastes to be effortlessly fitted from above, eliminating the need for awkward manoeuvres. Top-Fix ensures a 100% watertight seal without the need for messy sealants, making installations cleaner, quicker, and hassle-free.
How does it work?
A two-piece solution, which is ‘dropped-in’ through the waste hole from above, means no parts need to be held in place from below the sink or shower. Once in place, the two main pieces of Top-Fix are then tightened with a bolt, pulling them together and creating a seal.
The 14mm bolt which runs through the center of the unit can be tightened using either a ‘key’ (which is supplied in the box) or with a drill with a 14mm socket set. If the installer is using a drill, the use of a low setting is recommended to make sure the threads of the bolt are protected.
The action of tightening the bolt draws the two parts of Top-Fix together, with the bottom pulled back against the underside of the sink or shower. This creates a seal which is 100% watertight. There’s no need for any sealant – which can help make the job less messy and allow plumbers to keep the work area clean and tidy.
The solution has been engineered to work with all UK plumbing systems, both older sinks and showers and modern ones.
View Datasheet
View Installation Instructions